Royal Air Force Mildenhall

Sort By

Category

Show Advanced Options

Clear Filters |

100th CES maps future of RAF Mildenhall

U.S. Air Force Staff Sgt. Erik Holloman, left, 100th Civil Engineer Squadron NCO in charge of geobase from Washington, D.C., trains U.S. Air Force Senior Airman Logan Fountaine, 100th CES engineering journeyman from Ontario, N.Y., on how to use a geodimeter Sept. 27, 2013, on RAF Mildenhall, England. The 100th CES Engineer Assistants shop provides mapping, drafting and surveying support to maintain the installation base map. This support includes drawing and updating individual building floor plans, and ensuring all utilities and infrastructures are geo-referentially located to the exact coordinate system. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maps future of RAF Mildenhall

U.S. Air Force Senior Airman Young Park, 100th Civil Engineer Squadron engineering journeyman from Horsham, Pa., connects a survey controller to a geodimeter Sept. 27, 2013, on RAF Mildenhall, England. The controller is connected prior to use to map an area of land. Each time any building on base is constructed or modified, the 100th CES Engineer Assistants shop updates the associated floor plan and base map. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maps future of RAF Mildenhall

U.S. Air Force Airman 1st Class Abigail Cheek, 100th Civil Engineer Squadron engineering apprentice from Fairfax, Va., uses a global positioning system rover Sept. 27, 2013, on RAF Mildenhall, England. The 100th CES Engineer Assistants shop uses 32 satellites in orbit to give the user +/- 2 centimeter precision measurements anywhere on Earth. This is in comparison to a regular hand held GPS devise from a sporting goods store which has a precision of +/- 3 meters. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maps future of RAF Mildenhall

U.S. Air Force Staff Sgt. Erik Holloman, 100th Civil Engineer Squadron NCO in charge of geobase from Washington, D.C., uses a survey controller Sept. 27, 2013, on RAF Mildenhall, England. The 100th CES Engineer Assistants shop provides mapping, drafting and surveying support to keep the installation base map up-to-date. The shop personnel design and maintain floor plans, and make sure all utilities and infrastructure are properly geo-referenced to their exact coordinate system. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maps future of RAF Mildenhall

U.S. Air Force Senior Airman Logan Fountaine, left, 100th Civil Engineer Squadron engineering journeyman from Ontario, N.Y., uses a geodimeter while U.S. Air Force Airman 1st Class Abigail Cheek, 100th CES engineering apprentice from Fairfax, Va., uses a global positioning system rover Sept. 27, 2013, on RAF Mildenhall, England. The 100th CES Engineer Assistants shop provides mapping, drafting and surveying support to keep the installation base map up-to-date. The shop personnel design and maintain floor plans, and make sure all utilities and infrastructure are properly geo-referenced to their exact coordinate system. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES member wins federal award for energy program

Steve Perry, 100th Civil Engineer Squadron base energy manager, recently won the 2014 Federal Energy and Water Management award for his holistic energy program July 30, 2014, on RAF Mildenhall, England. Perry is responsible for making sure all energy on RAF Mildenhall is used effectively. (U.S. Air Force photo/Airman 1st Class Dillon Johnston/Released)

Details Download

100th CES members restore hot water to RAF Mildenhall dorm residents

U.S. Air Force Senior Airman Christopher Reel, 100th Civil Engineer Squadron Heating Ventilation and Air Conditioning/Refrigeration journeyman from Owasso, Okla., prepares the end of a new pipe prior to being installed Nov. 5, 2014, on RAF Mildenhall, England. Reel replaced a leaking old pipe restoring hot water to Dorm 215 residents. (U.S. Air Force photo by Airman 1st Class Jonathan Light/Released)

Details Download

100th CES members restore hot water to RAF Mildenhall dorm residents

Philip Hartigan-Wright, left, 100th Civil Engineer Squadron utility systems repairer from Thetford, England, and U.S. Air Force Senior Airman Christopher Reel, 100th CES Heating Ventilation and Air Conditioning/Refrigeration journeyman from Owasso, Okla., checks all the heating pumps to dorm 215 are turned on and working properly Nov. 5, 2014, on RAF Mildenhall, England. The HVAC shop provides Team Mildenhall hot water, heating and air conditioning. (U.S. Air Force photo by Airman 1st Class Jonathan Light/Released)

Details Download

100th CES members restore hot water to RAF Mildenhall dorm residents

Philip Hartigan-Wright, 100th Civil Engineer Squadron utility systems repairer from Thetford, England, replaces pipes attached to a domestic hot water circulation pump Nov. 5, 2014, on RAF Mildenhall, England. The new pipes were installed to fix a leak and restore water heating for Dorm 215 residents. (U.S. Air Force photo by Airman 1st Class Jonathan Light/Released)

Details Download

100th CES mixes ‘oil and water’

Airman 1st Class Andrew Burdette, 100th Civil Engineer Squadron Water and Fuels Maintenance journeyman from Victorville, Calif., tests a sample of the base’s water supply to ensure chlorine levels are ideal Feb. 28, 2013, at RAF Mildenhall, England. Safe chlorine levels ensure clean water, also known as potable water, is safe to drink. The shop is responsible for the cleansing and distribution of all potable water on base. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES mixes ‘oil and water’

Airman 1st Class Andrew Burdette, 100th Civil Engineer Squadron Water and Fuels Maintenance journeyman from Victorville, Calif., refers to a material safety data sheet prior to performing a task March 13, 2013, at RAF Mildenhall, England. The shop inspects and performs preventative maintenance on all fire prevention systems and fire hydrants, along with maintaining base facilities’ water and wastewater systems. This process ensures the base has fully operational utilities. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES mixes ‘oil and water’

Airman 1st Class Andrew Burdette, 100th Civil Engineer Squadron Water and Fuels Maintenance journeyman from Victorville, Calif., uses a pipe-threading machine to cut a steel pipe used for water flow March 13, 2013, at RAF Mildenhall, England. The wastewater goes into sloping sewer lines that are gravity fed. The water is fed into a pressurized sewer line and goes to a sewer plant for treatment. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES performs alignment on tanker, keeps mission on track

U.S. Air Force Senior Airman Abigail Slater, 100th Civil Engineer Squadron engineering flight journeyman, uses blue chalk string to establish a baseline at the rear of a KC-135 Stratotanker during an alignment procedure Nov. 23, 2015, on RAF Mildenhall, England. Airmen from 100th CES performed the inspection to check for signs of shifted alignment that may have occurred, which could affect the jet during flight. (U.S. Air Force photo by Karen Abeyasekere/Released)

Details Download

100th CES performs alignment on tanker, keeps mission on track

U.S. Air Force Senior Airman Abigail Slater, left, and U.S. Air Force Airman 1st Class Brandon Adams, both 100th Civil Engineer Squadron engineering flight journeymen, establish an exact vertical point from the front of the aircraft using a plum bob Nov. 23, 2015, on RAF Mildenhall, England. The 100th CES Airmen marked a selection of vertical points from the front to the back of a KC-135 Stratotanker, and again by each set of wheels to perform an alignment check. The check was done to search for any shift of alignment which, if left untreated, could affect the aircraft in flight. (U.S. Air Force photo by Karen Abeyasekere/Released)

Details Download

100th CES performs alignment on tanker, keeps mission on track

U.S. Air Force Senior Airman Abigail Slater, 100th Civil Engineer Squadron engineering flight journeyman, steadies a plumb bob to mark the exact vertical point on tape at the front of a KC-135 Stratotanker Nov. 23, 2015, on RAF Mildenhall, England. Airmen from the 100th CES performed an alignment check on the aircraft following a hard landing. This is the third time in six years that this check has been performed at RAF Mildenhall. (U.S. Air Force photo by Karen Abeyasekere/Released)

Details Download

100th CES performs alignment on tanker, keeps mission on track

A plumb bob is hung through a tow ring between a set of aircraft wheels to determine an exact vertical point as part of measurements taken for an alignment check on a KC-135 Stratotanker Nov. 23, 2015, on RAF Mildenhall, England. Airmen from the 100th CES performed an alignment check on the aircraft following a hard landing recently. This is only the third time in six years that this check has been performed at RAF Mildenhall. (U.S. Air Force photo by Karen Abeyasekere/Released)

Details Download

100th CES performs alignment on tanker, keeps mission on track

U.S. Air Force Airman 1st Class Brandon Adams, left, and U.S. Air Force Senior Airman Abigail Slater, both 100th Civil Engineer Squadron engineering flight journeymen, take measurements from specific points marked underneath a KC-135 Stratotanker Nov. 23, 2015, on RAF Mildenhall, England. The 100th CES Airmen were performing an alignment check on the jet to search for any shift in alignment. Three sets of measurements were taken to find the average, before compiling the data for the 100th Aircraft Maintenance Squadron. (U.S. Air Force photo by Karen Abeyasekere/Released)

Details Download

100th CES performs alignment on tanker, keeps mission on track

U.S. Air Force Airman 1st Class Brandon Adams, left, 100th Civil Engineer Squadron engineering flight journeyman, uses a geodimeter to take measurements as U.S. Air Force Senior Airman Abigail slater, also a 100th CES engineering flight journeyman, marks a precise spot underneath a KC-135 Stratotanker Nov. 23, 2015, on RAF Mildenhall, England. A plumb bob was initially used to mark exact vertical points around the aircraft, before three sets of measurements were taken to get the average and compile data. The 100th CES Airmen performed an alignment check to search for any shift in alignment which could damage the aircraft. (U.S. Air Force photo by Karen Abeyasekere/Released)

Details Download

100th CES performs alignment on tanker, keeps mission on track

U.S. Air Force Airman 1st Class Brandon Adams, 100th Civil Engineer Squadron engineering flight journeyman, uses a survey controller with a geodimeter, to measure between selected points underneath a KC-135 Stratotanker Nov. 23, 2015, on RAF Mildenhall, England. A plumb bob was initially used to mark exact vertical points around the aircraft, before three sets of measurements were taken to get the average and compile data. The 100th CES Airmen performed an alignment check to search for any shift in alignment which could damage the aircraft. (U.S. Air Force photo by Karen Abeyasekere/Released)

Details Download

100th CES Power Production certifies barrier engagement system

Staff Sgt. David Perdue, left, and Staff Sgt. Erik Rosales, both 100th Civil Engineer Squadron Power Production craftsmen, attach an arresting cable to a cable connector in preparation for raising the cable for barrier maintenance recertification at RAF Mildenhall, England, Aug. 5, 2020. Recertification of the Mobile Aircraft Arresting System is performed annually in addition to daily maintenance checks conducted by power production Airmen 365-days-a-year. (U.S. Air Force photo by Karen Abeyasekere)

Details Download