Royal Air Force Mildenhall

Sort By

Category

Show Advanced Options

Clear Filters |

100th CES improves quality of life for dorm residents

U.S. Air Force Master Sgt. Kenneth Oliver, 100th Civil Engineer Squadron Unaccompanied Housing superintendent from Woolwich, Maine, enters a dormitory to ensure the room is ready for occupancy March 24, 2015, on RAF Mildenhall, England. Oliver manages the dormitories with the help of four personnel — three assigned to his section, and one from the 352nd Special Operations Wing. The 100th CES renovates each dormitory periodically to ensure they are providing a good quality of life for Airmen who live there. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES improves quality of life for dorm residents

A recently refurbished kitchen in a dormitory is ready for use March 24, 2015, on RAF Mildenhall, England. Dormitory 111 has 124 rooms, sharing kitchens and bathrooms between two rooms. The 100th Civil Engineer Squadron renovates each dormitory periodically to ensure they are providing a good quality of life for Airmen who live there. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES improves quality of life for dorm residents

Dormitory 111 is ready for use after a renovation project March 24, 2015, on RAF Mildenhall, England. The 100th Civil Engineer Squadron renovated the dorm to improve the quality of life for the Airmen housed there. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES keeps Team Mildenhall cool in summer, warm in winter

Benjamin Shipp, 100th Civil Engineer Squadron Heating and Ventilation electrician from Cambridge, works on the limit controls of a burner March 5, 2013, at RAF Mildenhall, England. The burners produce seven million British thermal units per hour and are measured by electricians in hours due to duty load and running time. The shop manages and maintains the heating and air conditioning for all of RAF Mildenhall. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES keeps Team Mildenhall cool in summer, warm in winter

Staff Sgt. Harrison Rooks, 100th Civil Engineer Squadron Heating and Ventilation craftsman from Carrollton, Ga., performs maintenance on the fuel oil safeguard system which feeds a massive 2330 kW boiler unit March 5, 2013, at RAF Mildenhall, England. The boilers have a compliance inspection each year to meet the American Society of Heating, Refrigerating and Air-Conditioning Engineers standards and regulations to ensure they run at peak efficiency and are safe. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES keeps Team Mildenhall cool in summer, warm in winter

The 100th Civil Engineer Squadron Heating and Ventilation shop monitors the pressure system for all low, medium and high temperature applications on base. These pressures must be maintained to ensure safe operation and allow major area coverage. Many facility radiators and warehouse fan units are supplied from just one boiler house. The boilers are visually inspected three times-a-day to ensure they are running correctly. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES keeps Team Mildenhall cool in summer, warm in winter

Chris Ward, 100th Civil Engineer Squadron Heating and Ventilation fitter and boiler mechanic from Brandon, Suffolk, changes a fuel filter on the burner’s supply line March 5, 2013, at RAF Mildenhall, England. If any item has a malfunction, the military and civilian workforce is on call 24-hours-a-day, 365-days-a-year to get them back into operation in order to support the wing’s mission. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintain Team Mildenhall’s water quality

Airman 1st Class Andrew Burdette, 100th Civil Engineer Squadron Water and Fuels Maintenance journeyman from Victorville, Calif., reads the main booster pump meters to ensure the base’s water treatment plant is operating properly Feb. 28, 2013, at RAF Mildenhall, England. The shop inspects and performs preventative maintenance on all fire prevention systems and fire hydrants, along with maintaining base facilities’water and wastewater systems. This process ensures the base has fully operational utilities. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintain Team Mildenhall’s water quality

Airman 1st Class Andrew Burdette, 100th Civil Engineer Squadron Water and Fuels Maintenance journeyman from Victorville, Calif., cleans primary clarifiers to ensure optimum performance Feb. 28, 2013, at RAF Mildenhall, England. The shop has seven military service members and six civilians working seven days-a-week to ensure the plants are 100 percent mission-ready. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintain Team Mildenhall’s water quality

Airman 1st Class Andrew Burdette, 100th Civil Engineer Squadron Water and Fuels Maintenance journeyman from Victorville, Calif., takes a sample of the base water supply to ensure chlorine levels are correct Feb. 28, 2013, at RAF Mildenhall, England. Safe chlorine levels ensure clean water, also known as potable water, is safe to drink. The shop is responsible for the cleansing and distribution of all potable water on base. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintain Team Mildenhall’s water quality

Airman 1st Class Ian Adams, 100th Civil Engineer Squadron Water and Fuels Systems apprentice from Farmers Branch, Texas, tests raw sewage for total sedimentary solids Feb. 28, 2013, at RAF Mildenhall, England. The treatment plants are supervised and inspected seven days-a-week to ensure the water always maintains a safe standard. A reading of more than the acceptable total sedimentary solids means the treatment equipment in the earlier stage of the plant needs to be inspected and troubleshot to determine the cause of the negative reading. If a negative reading is found, the shop would inspect the Huber Screens which remove most of the immediate solids from the waste plant's inlet. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintain Team Mildenhall’s water quality

Airman 1st Class Ian Adams, 100th Civil Engineer Squadron Water and Fuels Systems apprentice from Farmers Branch, Texas, tests raw sewage for safe ammonia levels Feb. 28, 2013, at RAF Mildenhall, England. The Water and Fuels Systems Maintenance shop ensures only clean reclaimed water is released back into the environment after it has been treated at their plant. Water affects everyone on base, from having safe water to drink, to having water to clean and maintain equipment. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintains safety barriers

An F-15E Strike Eagle assigned to RAF Lakenheath, England, tests the runway barriers April 17, 2014, on RAF Mildenhall, England. The 100th Civil Engineer Squadron certifies the barrier annually to test serviceability and operational ability. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintains safety barriers

Fire trucks assigned to the 100th Civil Engineer Squadron Fire Department stand by on the runway April 17, 2014, during a barrier test on RAF Mildenhall, England. The fire department is in charge of inspecting an aircraft after an arrestment and conducting rewind operations to reset the barrier as quickly as possible. During an arrestment, the fire department will respond with several vehicles and multiple personnel. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintains safety barriers

U.S. Air Force Staff Sgt. Bryan Anchondo, 100th Civil Engineer Squadron power production craftsman from Denver, hooks a runway barrier tape to a vehicle tow bar April 17, 2014, on RAF Mildenhall, England. The vehicle pulls the barrier tape to disconnect it from the pendant cable. After the removal, the vehicle tows the cable off the runway and deactivates it. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintains safety barriers

U.S. Air Force Tech. Sgt. Christopher Marrs, left, 100th Civil Engineer Squadron NCO in charge of power production from Eugene, Ore., and U.S. Air Force Staff Sgt. Kyle Dulin, 100th CES firefighter from Redondo Beach, Calif., lead a barrier testing operation April 17, 2014, on RAF Mildenhall, England. The Airmen conducted rewind operations and gave signals to personnel in shacks. There are two shacks housing the machines that reel in the barrier, one on each side of the runway. They use a two-person concept to ensure safety. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintains safety barriers

Firefighters from the 100th Civil Engineer Squadron inspect a Barrier Arresting Kit-12 system April 17, 2014, during a barrier test on RAF Mildenhall, England. During the inspection, firemen take readings and inspect the system for leaks or broken parts. The inspections are required to certify the barrier back into service. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintains safety barriers

U.S. Air Force Tech. Sgt. Christopher Marrs, 100th Civil Engineer Squadron NCO in charge of electrical power production from Eugene, Ore., inspects a barrier as it’s reeled in April 17, 2014, on RAF Mildenhall, England. Marrs checked for proper reeling of the tape during rewind operations. If the tape is reeled incorrectly, it could be seriously damaged and cause the system to be inoperable. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintains safety barriers

An F-15E Strike Eagle assigned to RAF Lakenheath, England, tests runway barriers April 17, 2014, on RAF Mildenhall, England. The 100th Civil Engineer Squadron certifies the barrier annually to test serviceability and operational ability. (U.S. Air Force photo by Gina Randall/Released)

Details Download

100th CES maintains safety barriers

U.S. Air Force Airman 1st Class Brian Magkasi, 100th Civil Engineer Squadron electrical power production journeyman from Great Mills, Md., ties a rope to a barrier on the runway April 17, 2014, on RAF Mildenhall, England. The rope secures the cable to prevent damage to an aircraft during an arrestment. Service members place the support disks even spaces apart from each other to raise the cable for the aircraft tail hook. (U.S. Air Force photo by Gina Randall/Released)

Details Download